Reset Button; Summit4 Switch Leds - Extreme Networks Alpine 3808 Hardware Manual

Summit Switch Models

Reset Button

Use the reset button to cycle the switch down and bring the switch back up without powering off the
switch. Your saved switch configuration information is not lost; unsaved switch configurations are lost.
Use a non-conductive tool to push the reset button.

Summit4 Switch LEDs

Table 27 describes the LED activity on the Summit4 and Summit4/FX switches.
Table 27: Switch LED activity for the Summit4 and Summit4/FX
LED Color
Power Green
Yellow
MGMT Green blinking
• Slow
• Fast
Yellow
10/100 Mbps Port Status LEDs
(Summit4) Green
Amber
Green blinking
Off
(Summit4/FX) Green
Amber blinking
Amber
Off
Gigabit Ethernet Port Status LEDs
Activity Yellow
Off
Link Green
Green blinking
Off
88
Indicates
The Summit switch is powered up.
The Summit switch is indicating a power failure, overheat, or
fan failure.
The Summit switch is operating normally.
Power On Self Test (POST) or software download is in progress.
The Summit has failed its POST.
Link is present; port is enabled.
Frames are being transmitted and received on this port.
Link is present; port is disabled.
Link is not present.
Link is present; port is enabled.
Frames are being transmitted and received on this port.
Link is present; port is disabled.
Link is not present.
Frames are being transmitted and received on this port.
No activity on this port.
Link is present; port is enabled for full-duplex operation.
Link is present; port is disabled.
Link is not present.
Extreme Networks Consolidated Hardware Guide