Reset Button; Summit48Si Power Supply Leds - Extreme Networks Alpine 3808 Hardware Manual
Extreme alpine 3808: hardware guide
Hide thumbs
Also See for Alpine 3808:
- Hardware installation manual (394 pages) ,
- Hardware manual (336 pages) ,
- Troubleshooting manual (112 pages)
Table of Contents
Advertisement
Summit Switch Models
If one of the power supplies fails, or if source power to one of the power supplies fails, the second
power supply takes over, ensuring uninterrupted network operation. The switch also sends:
• A message to the syslog telling you which power supply failed
• An SNMP trap to your network management software
Reset Button
Use the reset button to cycle the switch down and bring the switch back up without powering off the
switch. Your saved switch configuration information is not lost; unsaved switch configurations are lost.
Use a non-conductive tool to push the reset button.
Summit48si Power Supply LEDs
Table 25 describes the light emitting diode LED activity on the Summit48si power supply.
Table 25: Power supply LED activity for the Summit48si
LED
Color
PSU Status LED
Green
Amber
Off
82
Indicates
AC input is above a minimum threshold, or no PSU is
present.
The PSU is not receiving adequate power.
No power is present.
Extreme Networks Consolidated Hardware Guide
Advertisement
Table of Contents
