Summitpx1 Application Switch Leds; Summit 200-24 Switch Front View - Extreme Networks Alpine 3808 Hardware Manual

SummitPx1 Application Switch LEDs

Table 31 describes the LED activity on the SummitPx1 application switch.
Table 31: SummitPx1 application switch LED activity
LED
Link
Management
Power
NOTE
For more information about configuring and using the SummitPx1 switch, see the SummitPx1
Application Switch Installation and Configuration Guide.

Summit 200-24 Switch Front View

The Summit 200-24 is 1U in height and has 24 autosensing 10BASE-T/100BASE-TX ports using RJ-45
connectors. It also provides two 10/100/1000BASE-T Gigabit Ethernet uplink ports using RJ-45
connectors and two optical ports that also allow Gigabit Ethernet uplink connections through Extreme
1000BASE-SX, 1000BASE-LX, or 1000BASE-ZX mini-GBICs using LC optical fiber connectors.
Figure 42 shows the Summit 200-24 switch front view.
Figure 42: Summit 200-24 switch front view
Extreme Networks Consolidated Hardware Guide
Color Indicates
Green The 1000BASE-T link is operational.
Yellow flashing There is activity on this link.
Green flashing
• Slow The SummitPx1 application switch is operating normally.
• Fast Power On Self Test (POST) in progress.
Red The SummitPx1 application switch has failed its POST.
Green The SummitPx1 application switch is powered up.
Red The SummitPx1 application switch is indicating a power or
temperature problem.
10/100 Mbps ports Mini-GBIC
port status LEDs
1000-baseT ports
SummitPx1 Application Switch LEDs
Unit stacking Console
ID LED port
Mini-GBIC ports
LC24001A
97