N Otes And Limitations - Matrox Maevex 5100 Series Release Notes

between 6 and 8 characters long. For more information on changing
passwords, see the Matrox Maevex User Guide.

If downgrading PowerStream Plus software to 2.00 (not recommended),
certain user settings related to version 2.00 (like the device tile organization)
won't be automatically restored. For more instructions on downgrading,
contact Matrox Technical Support.
Maevex 6152 Decoder

Software downgrading is limited to version 3.00.01.005 (first release).
Maevex 6122 and 6152 Encoders

Software downgrading is not supported (first release).
D owngrading to an older version of the firmware
5
Maevex 6100, 6120, and 6150 Encoders

Firmware downgrading to version 2.02.01.017 is supported only from the
default IP mode
supported, because the 2.02 release supports only IPv4.

Firmware downgrading is limited to version 2.02.01.017 (which also supports
the TLS1.2 protocol). To downgrade to an older firmware version (which uses
the TLS1.0 protocol), downgrade first to version 2.02.01.017, and then
downgrade further.
Maevex 6152 Decoder

Firmware downgrading is limited to version 3.00.01.005 (first release).
Maevex 6122 and 6152 Encoders

Firmware downgrading is not supported (first release).

N otes and limitations

7
Maevex 6152 and 6122 Encoders

If protected content support is enabled in PowerStream Plus, the respective
devices will protect all their outgoing streams, which can only be decoded and
displayed by Maevex 6152 decoders that are also enabled for protected
content support. Protocols that can carry protected content are restricted to
RTSP and RTP only. The local DisplayPort monitoring output, as well as the
recording function will be inaccessible (unsupported) in this mode. A warning
Release Notes – Matrox
®
4 Matrox
and from
IPv4 and IPv6
Maevex™ 6100 Series and Maevex™ 5100 Series
®
. Downgrading from
IPv4
isn't
IPv6