Matrox Maevex 5100 Series Release Notes page 11



Updating the firmware in parallel while your decoder devices are daisy
chained isn't supported. Decoder devices that are daisy chained must be added
to the Firmware Update Utility's list of devices to update and updated one
device at a time.
 Maevex 5150 Decoder – Only RTSP streams with a maximum resolution of
1920 x 1080p60 are supported. Audio encoding format must be AAC-LC.
Video encoding format must be YUV 4:2:0 8-bit at a maximum bit rate of
25 Mbps (maximum supported H.264 Level is 4.2).
Maevex SDK (PowerStream Plus DotNet, RS-232, and REST APIs)
For more information on the Matrox Maevex SDK including PowerStream Plus
DotNet API, RS-232 API, and REST APIs, or to obtain a copy of the SDK, contact
Matrox Technical Support
developer-tools).
®
Matrox
Connect a local monitor to a Maevex encoder's local output (
) before enabling the
OUT
(www.matrox.com/en/video/forms/products/maevex-
Release Notes – Matrox
Pass through
Maevex™ 6100 Series and Maevex™ 5100 Series 11
®
mode in PowerStream Plus.
HDMI