Matrox Maevex 5100 Series Release Notes page 6


Before recording to a networked shared drive or folder, make sure you have
the appropriate user rights and credentials to do so.

Interlaced streaming is not supported. (Interlaced input signal will be
converted to progressive before encoding.)

HDMI CEC (Consumer Electronics Control), HDR, and 3D modes are
currently not supported.
 Windows Server 2019, Windows Server 2016, and Windows 2008 R2 –
Windows Server operating systems disable the SSDP Discovery service by
default. For your devices to be automatically detected on your subnet, this
service needs to be enabled. For more information on enabling this service,
see Windows documentation.
 Switching between dynamic and static IP addresses isn't supported while
encoding or decoding. Before you change the IP address, make sure you stop
the encoding or decoding processes.
 If you're using PowerStream Plus software to set a static IP address, make
sure the IP address you want to set isn't already allocated to another device on
the network.

When the
performance, we recommend to simultaneously also set the encoding option
to
VBR

It is recommended to stop all streams before updating the firmware on an
encoder. If not, first disable (stop) then enable (restart) the inputs on the
encoder. If applicable, also update (resave) the encoder configuration for
future use.

RTSP and SRT streams with authentication created with prior software
releases are not forward or backward compatible and will not be recognized.
They must be recreated as new custom streams and their stream credentials re-
entered. We recommend that you delete previously used authenticated RTSP
and SRT streams prior to saving an encoder configuration and prior to
updating your software and firmware.

Wake-on-LAN (WOL) through PowerStream Plus is not supported for
devices using DNS host names.[3218]

Some security scanner software may incorrectly report the CVE-2021-23839
and CVE-2021-23841 vulnerabilities in spite of fixing these in this release (by
implementing fixes from Open SSL version 1.1.1).
Maevex 6100 / 6150 / 6120 Encoders

Capture, encoding, and streaming of protected content (HDCP over HDMI) is
not supported.
Release Notes – Matrox
®
6 Matrox
Optimized for Desktop
(Variable Bit Rate).
Maevex™ 6100 Series and Maevex™ 5100 Series
®
encoding mode is selected, for best