Pause Function - Ideal Security SK642 Owners Manual And Set-Up Manual

not enter your own home phone number, as the auto dialer uses your phone line to dial, it
will not work. You must also enter complete phone numbers including area codes, and if
long distance, include the 1.
a. Enter password followed by PROG
b. MEMORY will flash on the auto-dialer screen. (Fig.6)
c. Press ARM/DISARM
d. You are now ready to program up to 5 emergency telephone numbers. Press the
*/UP or #/DOWN
numbers will be dialed in the number sequence that they are entered.
e. Enter the telephone number you would like to store, followed by
ARM/DISARM
digits).
f. Repeat steps c to e for the four other numbers you may wish to store.
g. Press PROG
4. TO DELETE A TELEPHONE NUMBERS FROM MEMORY
a. Enter password followed by PROG
b. MEMORY will flash on the auto-dialer screen. (Fig.6)
c. Press ARM/DISARM
d. Press */UP
e. Press DEL./PAUSE
f. Press the ARM/DISARM
g. Press PROG

5. PAUSE FUNCTION

The "PAUSE" function can be stored as one digit in the telephone number memory
for some dialing operations. Every one PAUSE in the memory dialing sequence will
pause for 3.6 seconds. For example, if you want to store telephone number 514-363-1030
EXTENSION 230 to a memory location, the operation will be as follows:
a. Enter password then press PROG
b. MEMORY will flash on the auto-dialer screen.
c. Press ARM/DISARM
d. Press */UP
e. Enter 5143631030 DEL./PAUSE
appears on the screen, then enter 230.
f. Press ARM/DISARM
button to confirm.
buttons to select memory location from 1 to 5. The
to confirm (maximum of 32 digits, but only displays last 16
button eight (8) times to exit the set-up mode.
button to confirm.
or #/DOWN buttons to select the number you want to delete.
button to delete the number.
button to confirm.
button eight (8) times to exit the set-up mode.
button to confirm.
or #/DOWN button to select a memory location.
button to confirm.
button twice (2).
button twice (2).
button twice (2).
(hold for 2 seconds until the letter F