No Read - Honeywell Voyager 1400g Series User Manual

Scan Centering On, then scan one of the following bar codes to change the
top, bottom, left, or right of the centering window. Then scan the percent you
want to shift the centering window using digits on the inside back cover of this
manual. Scan Save. Default Centering = 40% for Top and Left, 60% for Bot-
tom and Right.
Centering On
Top of Centering Window
Left of Centering Window

No Read

With No Read turned On, the scanner notifies you if a code cannot be read. If
using an EZConfig-Scanning Tool Scan Data Window (see page 8-2), an "NR"
appears when a code cannot be read. If No Read is turned Off, the "NR" will
not appear. Default = Off.
On
If you want a different notation than "NR," for example, "Error," or "Bad Code,"
you can edit the output message (see
The hex code for the No Read symbol is 9C.
Bottom of Centering Window
Right of Centering Window
Data Formatting
* Centering Off
* Off
beginning on page 5-1).
3 - 13