Table of Contents
Advertisement
DT9102 I4
20220103-V0
6.3. Manual controls
DT9102 I4 can be adjusted by the membrane push-buttons
indicated by (1), (2), and (3) in the drawing.
Functions of the push-buttons during measurement
(1) MENU button: Entering the menu
When you push this button, the device will ask for a
password (code) in accordance with Chapter 7.1. Typing
the code (password) in, when the right code has been
given, it enters into the menu. During this time the clock
is runing, and the digital outputs don't change. If no
keys are pressed for a period of one minute, the instrument
restarts and the measurement goes on.
(2) ▲ button: displaying firmware version. The firmware
version remains on the display as long as the button is
being pressed. During this time the clock is runing, and
the digital outputs don't change.
(3) ENTER button: displaying the seconds.
The seconds refresh on the display as long as the button is
being pressed.
21
Advertisement
Table of Contents
