Tests (10. Menu Item) - Datcon DT9102 I4 Operating Instructions Manual

Function
Sequence of operations 1. Enter the menu by typing either the user code or the
36

7.12. Tests (10. menu item)

Checking the display and the limit outputs.
supervisor code.
The way the code should be type in is described in Chapter
7.1. Typing the code (password) in. You see this:
2. Keep stepping by pressing ▲ button as long as you see

this menu item:
3. Enter the menu item by pressing the ENTER button.

4. You see this
Display test). The mnemonic
5. If you want to test the display, press the ENTER button.
In this case all the segments on the display get switched on.
By pressing the ▲ button several times you can select from
several test patterns by which you can decide whether the
display is good or not. You may exit from the display test by
pressing the MENU button. You see this
6. If you want to test the limit outputs, press the ▲ button to

switch to the
mnemonic. (It's meaning: Output test).
7. Press the ENTER button.

8. You see this:
status of the digital outputs. In this present case both of
them are switched off. This is why the blinking sign is in the
middle position.
9. Pressing the ▲ button, you can switch the outputs on.

•
 = both are switched OFF.

•
 = 1. ON; 2. OFF.

•
 = 1. OFF; 2. ON.

•
 = both are switched ON.
Comment: the status you have selected here remains
unchanged as long as you exit the menu, and the
instrument starts measuring.
10. You can exit from the output test by pressing the MENU
button. You see the blinking
.
on the display. (It's meaning:

is blinking.
mnemonic from the
. The blinking signs indicates the

mnemonic.
DT9102 I4


again.

20220103-V0
.