Magnamed OxyMag Operation Manual page 42

Attribute
Warm-up
Rise time (at 10 l/min)
Overall System Response Time
Note
•
CO monitoring is achieved accurately 1 minute after initialization.
2
Gas Type
CO
2
Gas Type
CO
2
Note 1: Specification for precision is valid for any environmental condition specified, except in the cases expressed in the table below with
"Effects of Gas and Steam Interference".
Gases or Steam
N O
2
HAL
ENF, ISO, SEV
DES
42
Table 16: Accuracy specifications of the Capnography
Precision / Accuracy of measurements (under standard conditions):
Gas Type
0 - 15
15 - 25
Note: Gas concentration expressed in percent volume units.
Table 17: Interference specifications in the Capnography
Effects of Gas and Steam Interference:
Gas Level
60 vol%
4 vol%
5 vol%
15 vol%
Information on the concentration is analyzed and sent every 10
seconds.
Overall accuracy in measurements: 1 minute.
CO ≤ 90ms.
2
< 1s.
±(0.2 vol% + 2% reading)
Not specified
Precision / Accuracy
±(0.3 vol% + 4% reading)
--- (1 and 2)
--- (1)
+8% measurement read..
+12% measurement read.
Specification
Gas Type
CO
2
(3)
(3)
OxyMag_rev26