Filling Quantity Refrigerant; Maximum Heigth Difference - iDM iPUMP A 2-7 Installation Instructions Manual

Air heat pump with inverter-technology
Table of Contents

Advertisement

3. Description
Description
3 .15. Fil l in g q ua nt it y re f rig era n t
The iPump A 3-11 is pre-fi lled with refrigerant. Up to a distance of 6 m between indoor unit and outdoor unit no
refrigerant no additional needs to be refi lled. For pipe length more than 6 m, the following refrigerant quantities
must be refi lled.
3 .16. Maximum h e ig t h d if f e ren c e
If the height diff erence between the indoor unit and outdoor unit is lower than 5 m no oil elevation arc must be
installed before the inclination. In case of a higher height diff erence the installation must be done after 5 m. The
oil elevation arc must be installed by a certifi cated service technician. Whether the indoor unit or the outdoor
unit is higher, does not matter. The maximum height diff erence between indoor unit and outdoor unit is 10 m.
Height diff erence lower than 5 m
<5 m
24
Installation instructions iPump A 2-7, 3-11
Height diff erence more than 5 m
Version 1
max 5 m
max 5 m
Version 2
max 5 m
max 5 m
(C) IDM ENERGIESYSTEME GMBH

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for iDM iPUMP A 2-7

This manual is also suitable for:

Ipump a 3-11

Table of Contents