You can switch between the Setup screen and the Controls screen by
clicking on the tab.
Drag to customize auto shut-off
Click to change date and time, if necessary
5-2
Using Advanced Features
Setting the Clock
PhotoPC can record the date and time of your pictures automatically.
When you transfer the pictures from the camera to your computer, you
can see exactly when each shot was taken.
In order to have the time and date recorded, you need to set the camera's
clock from your computer. The PhotoPC clock will continue to keep
time accurately until you replace the batteries; at that point you will have
to connect the camera to your computer again and reset the clock.
Follow these steps to set the camera's clock:
1
Connect the camera to your computer and open the Setup screen as
described on page 5-1.
The Date/Time box shows the current values in your camera's
internal clock. You can use the arrow buttons to change these
values if necessary.
2
Click OK. EasyPhoto updates the date and time in your camera.
Setting Auto Shut-off
PhotoPC's power-saving feature automatically shuts off the camera if
you wait more than 60 seconds before taking a picture.