Using The Ac Adapter - Epson PhotoPC PhotoPC User Manual

6
Press down on the module until it snaps into the retaining clips at
the sides of the socket.
retaining clip
7
Place the socket cover on the camera body and press down until it
snaps into place.
8
Replace the batteries in the battery compartment and replace the
battery cover.
You'll see the camera's expanded capacity reflected in the control panel
(number of pictures remaining) when you take your first picture.
With expanded memory, you may notice a delay between the time you
press the shutter button and when the camera beeps. You can reduce this
delay by pressing the button down halfway, holding it as long as
necessary, and then pressing it down the rest of the way when you're
ready to take the picture.

Using the AC Adapter

The AC adapter (A882421, model PCDC002) allows you to connect
your PhotoPC camera to a standard electrical outlet. This is especially
useful when you are transferring pictures and operating the camera from
your computer. The adapter powers the camera, but does not charge the
batteries.
A
B
A-3