Using The Settings Menu; Setting The Clock; Setting The Alert Beep - Epson PhotoPC 700 User Manual

Using the Settings Menu

The Settings menu allows you to change
settings for the camera's internal clock, the
alert beep, the LCD brightness level, and the
energy saving mode.
Follow the instructions below for the changing settings.

Setting the clock

Follow these steps to adjust the date (year,
month, day) and the time (hour and minutes).
1. Access the LCD monitor menus in Playback mode
and select the Settings menu as described on page
3-2, then press the SELECT button. Icons for each
setting appear on the screen, with the clock icon
highlighted in orange.
2. Press the SELECT button again to enter the clock setting
mode.
3. Press the SELECT button until the item you want to
adjust is selected. The selected item turns red.
4. Press the button to increase the number, or the
button to decrease the number, until the item
you want to adjust is correct.
5. Press the SELECT button after you change one setting,
and want to change another clock setting.
6. Repeat steps 3 through 5 until the date and time are
correctly adjusted and saved. Press the SELECT
button or BACK button to return to the Settings
menu.

Setting the alert beep

To turn the camera's alert beep on or off, follow
these steps:
1. Access the LCD monitor menus in Playback mode
and select the Settings menu as described on page
3-2, then press the SELECT button. Icons for each
setting appear on the screen, with the uppermost
icon highlighted in orange.
2. Press the button to select the beep setting icon
then press the SELECT button to select ON or OFF.
The current selection is highlighted.
3. Press the BACK button to save your setting and return
to the Settings menu.
Using the LCD Monitor Menus
3
;
3-7