The Shutter Speed slider is set to Auto.
2
Drag the slider to the left to reduce the shutter speed, and to the
right to increase the shutter speed. The shutter speed range is from
1/30 second to 1/10,000 second.
3
When you are finished, click OK.
5-4
Using Advanced Features
Adjusting Port Settings
You can use PhotoPC Settings to adjust the serial port connection for
PhotoPC. You will need to adjust these settings if you see an error
message when you connect the camera. You may also want to
experiment with the speed setting to decrease the time it takes to transfer
pictures to your computer.
Drag to set shutter speed
Click to change port for camera
connection
Click to change speed for
transferring pictures