Service And Maintenance; Servicing And Maintenance - Siemens SIWAREX WL230 Equipment Manual

Service and maintenance

6.1

Servicing and maintenance

Important notes on cleaning
NOTICE
Damage to load cells, measurement errors
Dirt must not be allowed to accumulate in the vicinity of a load cell.
Do not subject cable glands, sealing elements and flat seals directly to the jet from a high-
pressure hose.
Compact installation unit
• Check the compact installation units according to the ambient conditions.
Select the servicing intervals based on the emergence of dust, dirt and moisture.
• Keep the compact installation units free of dirt.
• Check the bearing surfaces of the pendulum supports:
– Clean the bearing surfaces as required.
– Grease the bearing surfaces as needed.
Guide elements
• Check the guide elements according to the ambient conditions.
Select the servicing intervals based on the emergence of dust, dirt and moisture.
• Keep the guide elements free of dirt.
• Clean the pivot heads as required.
• The pivot heads are maintenance-free and need not be lubricated.
Overload protection
Personal injury and damage to property
Dirty, frozen or incorrectly adjusted overload protection elements lead to erroneous
measurements due to blockage or to an overflow of the scale. Personal injury and material
damage may occur.
SB-S SA
Equipment Manual, 12/2020, A5E02390707B-03
DANGER
6
37