Genie Z-45/22 Service Manual page 22

Section 3 - Scheduled Maintenance Inspections
Maintenance Tables
3 - 2
Table A
A-1 Inspect the Operating Instruction and Safety Manuals
A-2 Inspect the Decals and Placards
A-3 Inspect for Damage, Loose or Missing Parts
A-4 Check the Engine Oil Level
A-5 Check the Engine Coolant Level
A-6 Check for Fuel Leaks
A-7 Check the Hydraulic Oil Level
A-8 Check for Hydraulic Leaks
A-9 Check Tire Pressure
A-10 Test the Platform and Ground Controls
A-11 Test Auxiliary Power Operation
A-12 Test the Tilt Level Sensor
A-13 Test the Limit Switches
Every 100 hours, check for and/or perform as necessary the
engine maintenance procedures listed below.
A-14 Replace the Engine Oil and Filter
A-15 Change the Engine Air Filter
A-16 Drain the Fuel Filter/Water Separator - Diesel Models
Genie Z-45/22
Service Manual - First Edition
Part No. 29487