ABB ACS2000 AFE 2MVA User Manual page 65

65 ACS2000 AFE 2MVA UM 3BHS355653 ZAB E01 REV. H
Analog outputs
—
Table 3-13 Optional analog output signal allocation
Terminal
X31-6
X32-6
X31-7
X32-7
3.3.5 Fieldbus communication interfaces (option)
Overview
Fieldbus communication interfaces are used for
the bidirectional communication between the drive
and a higher-level process control system. Typi-
cally, operational commands, status messages of
the drive, speed or torque reference values, and
actual values are transmitted.
Available fieldbuses
The drive can be equipped with one of the follow-
ing fieldbus interfaces.
Fieldbus
AF 100 fieldbus communication
interface
MOdbus TCP
Modbus RTU
Profibus DP
AF 100
Channel Default setting
AO1+ Freely programmable
AO1-
AO2+ Freely programmable
AO2-
For further information on data transmis-
sion and on data and signal allocation to
the transmitted datasets, see:
• Signal and parameter table
• Installation and start-up guide of the
installed fieldbus interface
• Engineering documents
Interface type
CI810
NETA-21
NMBA-01
NPBA-12
Terminal allocation
X1A:1
X1B:1
X1B:2
X1B:3
X2:1
X2:2
X2:3
X2:4
L- 0 V supply in
L+ 24 VDC supply in
L+ 24 VDC supply out
SA Redundant power supply "A" monitoring input
+ + Signal
- - Signal
SH Shield
SH Shield
Par. group
Customer connections