ABB ACS2000 AFE 2MVA User Manual page 142

CHAPTER 9 – CDP CONTROL PANEL
9.5.3 Toggle between actual signals display and
fault history
To toggle between actual signals display and
fault history display, press a fast navigation
key.
1 L ->
1 LAST FAULT
+Overspeed
070730 12:30:02.3256
9.5.4 Displaying three actual signals
1. To display the full name of three actual signals,
press and hold the ACT key.
1 L ->
StateINU
MOTOR SPEED
POWER
2. To return to the actual signals display, release
the ACT key.
9.5.5 Selecting actual signals
1. To select the actual signals display, press the
ACT key.
1 L ->
StateINU
MOTOR SP
POWER
2. To select a row where the actual signal is to be
displayed, press the corresponding slow navi-
gation key. A blinking cursor indicates the
selected line.
1 L ->
StateINU
MOTOR SP
POWER
3. To enter the actual signal selection function,
press the ENTER key.
1 L ->
1 ACTUAL SIGNALS
15 POWER
0.0 kW
4. To select a parameter group, press the corre-
sponding fast navigation key.
600.0 rpm
5. To select an actual signal, press the corre-
sponding slow navigation key.
600.0 rpm
6. To accept the selection and to return to the
actual signals mode, press the ENTER key.
7. To cancel the selection and keep the original
selection, press any of the mode selection keys.
The selected CDP control panel mode is
entered.
600.0 rpm
ReadyRun
600.00 rpm
75.0 kW
600.0 rpm
ReadyRun
600.00 rpm
75.0 kW
600.0 rpm
142
1 L -> 600.0 rpm
1 ACTUAL SIGNALS
01 DC VOLTAGE
1000 V
1 L -> 600.0 rpm
2 ACTUAL SIGNALS
05 NP VOLTAGE
1000 V
1 L -> 600.0 rpm
StateINU ReadyOn
MOTOR SP 0.00 rpm
NP VOLT 0 V
1 L -> 600.0 rpm
ReadyOn
StateINU
0.00 rpm
MOTOR SP
POWER 0.0 kW