Table of Contents
Advertisement
5.
Place the new roll of paper in the printer well, insuring that
spindle is located behind retaining blocks, and that the paper
feeds forward from the bottom of the roll.
6.
Insert edge of paper under the gray rubber pinch roller until
paper exits top of printer.
7.
Push the red lever as far back as possible.
8.
Press the FEED button to feed through several inches of paper.
9.
Replace the printer cover taking care to feed paper through
opening.
NOTE: This is thermally activated paper. If paper is inserted
backwards, no printing will appear on paper.
STOPPING THE PRINTER
The STOP button on the Printer/Charger serves two functions:
1. Press STOP to abort current operation (report printing or
data transfer).
2.
Press STOP to clear Printer/Charger of error condition.
NOTE: If a test is stored in the Printer/Charger memory, it will
remain there and can be printed after the STOP button has been
pressed.
29
Advertisement
Table of Contents
