9
Switch, Contact Plate, Electronic Module
7
6
5
9.1
Special Servicing Tools, Servicing Aids
Punch-down tool – 5910 890 4000
–
STIHL multipurpose grease – 0781 120 1110
–
9.2
Removing the Switch
Preparations, @ 2.4.
N
Perform test with ADG 2 Analyzer, @ 5.
N
Remove right handle housing, @ 6.2.
N
Take the switch (2) with switch housing (1, 3) out of
N
their seat in the left handle housing.
3
Raise the tabs (arrows) on the left switch housing (1)
N
and remove the right switch housing (3).
Take the switch (2) out of the switch housing (1).
N
Pull connector (8) off the switch (2).
N
18
2
3
1
2
8
1
4
9.3
Installing the Switch
Place the switch (2) in the left switch housing (1).
N
Lubricate socket (arrow) on switch (2) with
N
multipurpose grease.
2
1
BGA 86