Controls; Removing The Ergo Lever; Removing The Trigger; Removing The Retaining Latch - Stihl BGA 86 Service Manual

7

Controls

10
10
9
8
7
7.1

Removing the Ergo Lever

Preparations, @ 2.4.
N
Remove right handle housing, @ 6.2.
N
Remove the lever (9).
N
Remove the torsion spring (8).
N
7.2

Removing the Trigger

Remove the ergo lever (9), @ 7.1.
N
Take the switch housing (2) with switch (1) out of its
N
seat and put it to one side.
Remove the torsion spring (7).
N
Remove the trigger (6).
N
7.3

Removing the Retaining Latch

Remove the ergo lever (9), @ 7.1.
N
Remove the trigger (6), @ 7.2.
N
Remove the torsion spring (4).
N
Remove the retaining latch (3).
N
Pull the flat spring (5) out of its guide.
N
7.4

Removing Battery Locking Levers

Take the locking levers (10) and flat springs out of the
N
left handle housing.
12
5
6
3
4
1
2
7.5

Installing Battery Locking Levers

10
10
Push locking levers (10) and flat springs into the
N
bores in the left handle housing and fit the flat springs
in their seats (arrows) at the same time. The locking
levers (10) are pretensioned.
BGA 86