Initail Setup - ElectrIQ iQLEAN-GR01 User Manual

INITIAL SETUP
REMOVE THE BUMPER
PROTECTORS
Gently pull off the bumpers protectors and
keep safe for future use and storage.
There are two ways to charge
the robot:
1. On the charging station.
2. Charging directly from the
power adapter.
INSTALL SIDE BRUSHES
Install the side brushes paying attention to
the
'L' and 'R' markings
CHARGE YOUR ROBOT
Place the charging station
against a wall on flat, level
ground. Keep the charging
station free of obstructions 0.5m
to the left and right and 1.5m in
front.
Indicator Light
8