ElectrIQ iQLEAN-GR01 User Manual page 12

ADD DEVICE
4. At the Device screen select
the + symbol to add a
device.
7. Reset the device by
pressing the power switch.
After restarting, press and
hold the device button3-5
seconds. The device will
make a confirmation tone.
Click next on your phone.
Note: do not attempt to
connect from the charging
base.Make sure that after
the long press a network
prompt tone is received.
5. You will now be prompted to
scan the QR code which is
located on the underside of
your robot.
8. Now the phone, robot and
router will build a connection
to each other.
12
6. Now select your Wi-Fi
network from the list and
enter your Wi-Fi password.
9. Confirm the message below.