ElectrIQ iQLEAN-CR01 User Manual

ElectrIQ iQLEAN-CR01 User Manual

Robot vacuum cleaner with camera, vslam and slam navigation
Hide thumbs Also See for iQLEAN-CR01:

Advertisement

USER MANUAL
Robot Vacuum Cleaner with
Camera, VSLAM and SLAM Navigation
iQLEAN-CR01
Thank you for choosing your electriQ robot vacuum cleaner.
This instruction manual is designed to provide you with all required instructions
related to the installation, use and maintenance of the appliance. In order to operate
the unit correctly and safely, please read this instruction manual carefully before
installation and usage.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iQLEAN-CR01 and is the answer not in the manual?

Questions and answers

Summary of Contents for ElectrIQ iQLEAN-CR01

  • Page 1 Camera, VSLAM and SLAM Navigation iQLEAN-CR01 Thank you for choosing your electriQ robot vacuum cleaner. This instruction manual is designed to provide you with all required instructions related to the installation, use and maintenance of the appliance. In order to operate the unit correctly and safely, please read this instruction manual carefully before installation and usage.
  • Page 2: Table Of Contents

    CONTENTS SAFETY PARTS LIST PRODUCT OVERVIEW INITIAL SETUP OPERATION APP CONTROL CLEANING AND MAINTENANCE TROUBLESHOOTING TECHNICAL SPECIFICATIONS SUPPORT...
  • Page 3: Safety

    SAFETY PRECAUTIONS IMPORTANT • Carefully read the instructions before operating the unit. Please retain the manual for future reference. • This appliance is for indoor use only. • Rating: This unit must be only connected to a 220-230 V earthed outlet.
  • Page 4 • Do not use in an environment where there is a risk of fire or explosion. • Do not use to clean printer toner spilled on the floor as this could cause fire. • Before using the robot cleaner, remove any fragile objects from the floor e.g.
  • Page 5: Parts List

    PARTS LIST Please familiarise yourself with this list before commencing operation. Charging Base Mains Adapter Robot Vacuum Remote Control e-tank (Dust Box & Cleaning Water Tank) Brush HEPA Filter Side brushes...
  • Page 6: Product Overview

    PRODUCT OVERVIEW Your robot vacuum cleaner is designed for cleaning homes, small offices and other small rooms. It provides excellent cleaning for a variety of floor types including: • Wooden floors • Tiled floors • Stone floors • Short-pile carpets (up to 1.5cm deep) Visual Navigation Sensors Go Home Start/Pause...
  • Page 7 e-TANK – DUST BOX / WATER TANK HEPA Filter Cover HEPA Filter Sponge Filter Primary Filter Water Tank Cap e-Tank Top e-Tank Base Dust Box Side Cover MOPPING PLATE Mopping Plate Release Catch CHARGING STATION Signal Indicator DC socket Charging Contacts...
  • Page 8: Initial Setup

    INITIAL SET UP SIDE BRUSHES Install the side brushes paying attention to the ‘L’ and ‘R’ markings BUMPER PROTECTORS Remove the bumper protectors 2 IN 1 e-TANK Press the dust box release button to eject the dust box. 1. Fit the mop onto the mopping plate 2.
  • Page 9 CHARGE YOUR ROBOT Place the charging station against a wall on flat, level ground. Keep the charging station free of obstructions 0.5m to the left and right and 1.5m in front. Turn on the power switch There are two ways to charge the robot: a.
  • Page 10: Operation

    OPERATION The product has different cleaning modes to cater for different cleaning needs. The cleaning mode can be chosen on the robot, on the remote control or on the app. The robot will scan the immediate environment and generate a map in its internal memory.
  • Page 11 REMOTE CONTROL On/Off Home Forward Start/Pause Turn Left Turn Right Back Decrease Suction Increase Suction Spot Cleaning Border Cleaning Please insert 2 x AAA batteries, not included Before using your robot vacuum cleaner: o Arrange your furniture so that your robot move around freely. Block off hazards such as stairways and bannisters to prevent your robot from danger.
  • Page 12: App Control

    APP CONTROL Before you start: • Ensure your router provides a standard 2.4GHZ connection. • If your router is dual band ensure that both networks have different network names (SSID). The provider of your router / Internet service provider will be able to provide advice specific to your router.
  • Page 13 ADD DEVICE 1. At the Device screen select 2. You will now be prompted to 3. Now select your Wi-Fi the + symbol to add a scan the QR code which is network from the list and device. located on the underside of enter your Wi-Fi password.
  • Page 14 7. Confirm WeBack’s 8. Success – all devices 9. The WeBack home screen connection of the robot to connected. now lists your robot. the Wi-Fi network.
  • Page 15 CONTROLLING YOUR DEVICE THROUGH THE APP THE DEVICE SCREEN The device screen is the main control screen for the cleaning robot, providing access to the controls to amend the functions and settings. Status: the robot’s Back: Returns to the WeBack home screen. current activity.
  • Page 16 THE SETTINGS SCREEN This screen gives you the option to turn off the robot’s voice and update some of the device’s basic settings. Voice switch – switch voice on and off Crossing Obstacles – whether to allow robot to cross 1cm doorways and other obstacles. Breakpoint Cleaning –...
  • Page 17: Cleaning And Maintenance

    CLEANING AND MAINTENANCE DUST BOX AND FILTER CLEANING 1. Press the dust box release button to remove the dust box. 2. Open the dust box side cover. 3. Empty the contents into your waste bin. 4. Open the HEPA filter cover 5.
  • Page 18 WATER TANK MAINTENANCE 1. Release the e-Tank. 2. Turn over and detach the mopping plate. 3. Remove the mop. 4. Empty out any remaining water. 5. Clean the mopping plate under the tap. 6. Leave the mopping plate to air dry for 24 hours.
  • Page 19 CLEANING THE BRUSHES 1. Open the roller brush cover assembly. 2. Take out the roller brush 3. Use the cleaning brush provided to cut off any hair tangled on the roller brush. 4. Take off the side brush. Clean with a soft cloth. MAINTENANCE OF CHARGE TERMINALS AND WHEELS Note: the charging terminals on the charging station and the underside of the robot contain sensitive electronic components.
  • Page 20: Troubleshooting

    TROUBLESHOOTING FAULT POSSIBLE CAUSE SOLUTION Robot does not charge. Poor connection between the Ensure contacts are clean and electrodes on the base of the free from obstruction. robot and the charging base. The charging base is switched Keep charging base switched on off.
  • Page 21: Technical Specifications

    TECHNICAL SPECIFICATIONS Model name: iQlean-CR01 CHARGING STATION Description Parameter Size 155 x 150 x 80 mm Input Output 19V 0.6A Rated Power 11.4W Rated Frequency 50/60Hz ROBOT Description Parameter Size 320 x 76mm Battery Lithium Ion, 3200mAh Running Time 130 mins max.

Table of Contents