Table of Contents
Advertisement
Quick Links
USER MANUAL
Window Cleaning Robot
iQlean-WR01
Thank you for choosing your electriQ robot window cleaner. This instruction manual
is designed to provide you with all required instructions related to the installation,
use and maintenance of the appliance. In order to operate the unit correctly and
safely, please read this instruction manual carefully before installation and usage.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ElectrIQ CLARA
Summary of Contents for ElectrIQ CLARA
- Page 1 Window Cleaning Robot iQlean-WR01 Thank you for choosing your electriQ robot window cleaner. This instruction manual is designed to provide you with all required instructions related to the installation, use and maintenance of the appliance. In order to operate the unit correctly and...
-
Page 2: Table Of Contents
CONTENTS SAFETY PRODUCT OVERVIEW ASSEMBLY OPERATION DIAGNOSTICS CLEANING AND MAINTENANCE TROUBLESHOOTING TECHNICAL SPECIFICATION SUPPORT... -
Page 3: Safety
SAFETY PRECAUTIONS Important • Carefully read the instructions before operating the unit. Please retain the manual for future reference • Before use ensure product’s safety harness is securely fastened. • People on the ground and balconies below the robot should be protected from the danger of injury caused by accidental failure of the robot. - Page 4 • Do not use the appliance for any other purposes than its intended use. • Do not use the appliance in places with high humidity (>80%RH) • Do not immerse the robot in water or other liquids. If the robot is immersed in water or other liquids by mistake, do not touch it with your hands.
-
Page 5: Product Overview
PRODUCT OVERVIEW Your robot window cleaner is designed to clean windows at a rate of 4 minutes per square meter. It is mains powered and has a backup battery to power the unit in the event of a power cut. A remote control can be used to set the robot on a cleaning pattern or it can be controlled manually. -
Page 6: Assembly
ASSEMBLY CLEANING CLOTH Cleaning ring Cleaning cloth The robot has two cleaning wheels on its underside. Each wheel requires a cleaning cloth, which is in turn held in place by a cleaning ring. Take the cleaning ring, and warp the cleaning cloth over it. Take the assembled ring and cloth and press it onto the cleaning wheel. -
Page 7: Operation
Mains Power Supply figure of 8’ ‘ jack Extension Safety cable (4m) harness Once the power is switched on, check the fan is creating suction and that the status indicator lights are OK. Place the robot on the window, keep it away from the window frame initially. - Page 8 STEP2：DAMP CLEAN Remove the dirty cleaning cloths and replace with clean ones. Spray the clean cloths with 1 to 2 spays of cleaning agent so that the cloth is damp but not wet. A wet cleaning cloth will give poor results. REMOTE CONTROL The robot’s movements are controlled either manually or can be set to follow predetermined patters.
-
Page 9: Diagnostics
DIAGNOSTICS The functional status of the robot can be read from its status indicator window. There are three LEDs, one in the left of the window, one in the centre and one on the right. Left Centre Right STATUS Charging Green Fully charged Warning... - Page 10 • Cleaning cloth is too wet • Glass is already very clean and slippery • Humidity is too low • Solution: use program , or putting the machine in the middle of the window to avoid malfunction 5. Uneven operation of the machine •...
-
Page 11: Technical Specification
2 years Cleaning speed (two 4min per m² passes required) Maximum cleaning area Height:6 meters Wide:5meters electriQ UK SUPPORT www.electriQ.co.uk/support www.electriQ.co.uk Call: 0330 390 3061 Office hours: 9AM - 5PM Monday to Friday Unit J6, Lowfields Business Park Lowfields Way, Elland...
Need help?
Do you have a question about the CLARA and is the answer not in the manual?
Questions and answers