ElectrIQ eiQ-C11E User Manual

ElectrIQ eiQ-C11E User Manual

Intelligent robotic vacuum cleaner

Advertisement

eiQ-C11E
Intelligent Robotic Vacuum Cleaner
USER MANUAL
Thank you for choosing electriQ
Please read this user manual before using this robotic vacuum cleaner
and keep it safe for future reference.
Visit our page www.electriQ.co.uk for our entire range of Intelligent Electricals

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the eiQ-C11E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ElectrIQ eiQ-C11E

  • Page 1 Intelligent Robotic Vacuum Cleaner USER MANUAL Thank you for choosing electriQ Please read this user manual before using this robotic vacuum cleaner and keep it safe for future reference. Visit our page www.electriQ.co.uk for our entire range of Intelligent Electricals...
  • Page 2: Table Of Contents

    Warnings We have provided instructions with this appliance so that you will know how to use it safely. The plug must be removed from the socket-outlet before cleaning or maintaining the appliance. This appliance can be used by children aged 8 years and above people with reduced physical, sensory or mental capabilities or persons who lack experience and knowledge providing they have been given supervision or instruction...
  • Page 3: Safety Instructions

    Thanks for purchasing the intelligent vacuum cleaner eIQ-C11E, we hope you enjoy using it! 1.Safety instructions 1.1 Use Notes Please read and remember the following safety precautions: * Read the instructions carefully; only use this product in line with this operating instructions.
  • Page 4 Do not pull the machine by the power cord. Do not twist or bend the wire or put anything heavy on it. Do not put the machine near the fire, inflammable, explosive and corrosive materials. Do not place any clothing or parts of your body (hair, fingers, etc.) into the the main brush and wheels as it will cause personal injury.
  • Page 5: Child Safety

    1.3 Child Safety 1.4 About Battery 1. Only use the machine with the original battery. 2. Please turn off the power switch before taking out the battery . 3. The battery must be taken out before disposing the robot. 4. If you want to replace the battery, please contact the after-sale department.
  • Page 6: Product Parts

    2. Product Parts 2.1 Main Body and Accessories Remote Control Zone divider Charging Station *1piece *1piece *1piece Main Body 1piece Battery Trailing Bar Assembly *1piece *1piece *1piece Intelligent Vacuum Cleaner USER MANUAL Thank you for purchasing the product. Please read the manual carefully before using. Filter Side Brush Clean Brush...
  • Page 7: Accessories Introduction

    2.2 Accessories Introduction Front View Dust Box Button Top Cover Control Buttons Display Screen Negative Ion Function Area Handle Signal Window Wall Detection Sensors Charging Electrodes Bottom View UV Lamp Battery Pack Front Wheel Left Wheel Middle Rubber Brush Ground Detection Middle Bristle Brush Sensors...
  • Page 8: Building Your Vacuum Cleaner

    3.Building your Vacuum Cleaner 3.1 Main Body Please install the battery before using the cleaner! Insert the pin on the terminal Black White Unplug the pin when pressing the snap joint 1. Loosen the screw a with screwdriver to unfold the battery cover. 2.
  • Page 9: Zone Divider

    3.3 Zone Divider Power Power indicator Switch 1. Unfold the battery 2. Put 2 D alkaline batteries 3. Turn on the power 4. Put the zone divider cover into the battery slot, making switch, the power on a flat bit of floor and sure to match the positive indicator will flash.
  • Page 10 Setting up your Vacuum Setting the current time 1. Turn on the power switch of the robot cleaner then press the button. Then the screen will flash and the robot will go into standby mode. 2. Press and hold button for at least three seconds, the robot will go to time setting and the hour digits on the screen will flash 3.
  • Page 11 8. If you do not need the time scheduling, you can disable it by pressing the button for at least 3 second, then the robot will show you the time setting as you did before. Press button, you will see and then press AUTO button for at least 3 second to save the setting.You can do the same process to disable the time setting for each day.
  • Page 12: Remote Control

    4.1. Working Modes. Auto Cleaning Standby 1. Press AUTO on the vacuum or the power 2. Press the AUTO button again and the button on the remote control. The display will robot will start to clean automatically. To stop light up, meaning that the robot is on standby. the cleaning, press any button on the vacuum.
  • Page 13: Zone Divider

    4.3 Zone Divider 1.Slide Switch Close power Low gear Middle gear High gear 2.Signal emitter 3.Infrared emitter 4.Power indicator Name F u n c t i o n Slide the button from left to right. Each click of the slider will indicate Slide Switch when you've switched to another function: close power, low gear, middle gear and high gear.
  • Page 14: Charging Station

    4.4 Charging Station Danger! Electric shock. No obstacle here. How to use: 1. Follow the instructions from page 8, and ues the photos above. 2. Turn on the power switch, press the button “Charge” and the cleaner will move back to the charging station.
  • Page 15: Looking After Your Vacuum Cleaner

    4.5.2 Auto Charging: 2. Auto charging: 3. Controls for finding the dock: Turn on the power switch, press “AUTO” When the battery power is low during the cleaning, the cleaner will emit the sound “di di”, the main button, then press the “CHARGE” button. brush will also stop working and the machine will get The vacuum will then start to search for back to the charging station automatically.
  • Page 16: Cleaning The Filter

    5.3.2 Cleaning the Dust Box Pour out the dust, then use a clean brush to clean the dust box and fan assembly. Take out the fan assembly and then clean the dust box. (note: the fan assembly cannot be cleaned directly with water.) 5.4 Cleaning the Filter PU LL 1.
  • Page 17: Cleaning The Side Brush

    Rubber sleeve Rubber sleeve Bearing 4. Take out the rubber sleeve from the middle 3. Take out the middle bristle brush or middle bristle brush or middle rubber brush. rubber brush. Tips: There is a small bearing in the rubber sleeve. When cleaning the main brush, keep an eye out if the bearing falls out.
  • Page 18: Cleaning The Left Wheel And Right Wheel

    5.7 Cleaning the Front Wheel 1. Pull out the front wheel with fingers or a tool.(as picture) 2. Clean the front wheel with a clean brush. 3. When putting the front wheel back in place, put it in the correct place and press down. (Tips:The hair or cloth strips from the brush may get tangled in the axle of the wheels, so make sure to clean it regulary.
  • Page 19: Common Faults

    Cleaning the Mop 1.There is a sticker on the trailing bar, so it is easy to put together and take apart. 2.The mop can be dry or wet when used. 6.Potential Faults 6.1 Alarm and Prompt Facility Tips: 1. If the cleaner stops working, it will emit the alarm sound “di di”. 2.
  • Page 20: Technical Specifications

    When the battery power is low, please charge the machine by inserting the power supply directly into the robot. zone divider zone divider. zone divider The cleaner stops when Check whether the cleaner is in "Spot Cleaning" mode, this mode only it has been working for a lasts 3-5 minutes.
  • Page 21 UK SUPPORT www.electriQ.co.uk/support If the unit still fails to operate call: 0871 620 1057 or complete the online form Office hours: 9AM - 5PM Monday to Friday www.electriQ.co.uk Unit 2, The Nursery Berristow Lane South Normanton Derbyshire, DE55 2FX...

Table of Contents