Setting Up the Projector
18
3. If you're using the optional BNC/VGA cable, connect the VGA
connector to the projector's
connectors into your computer's monitor ports.
4. Optionally, you can connect an external monitor (see page 23),
play sound through the projector (see page 24), or connect a USB
cable to use the remote control as a mouse (see page 22).
5. When you've finished making any connections, see Chapter 2 for
instructions on turning on the projector and adjusting the image.
Once the projector is turned on, be sure to:
Enter the projector's Setting menu, then make sure
■
Computer Input is set to
After exiting the menu system, press the remote control's
■
button, or repeatedly press the
Comp1
button on the projector's control panel to select the correct
source (
Computer (Analog-RGB)
screen).
port and plug the BNC
Computer
. See page 72.
Analog-RGB
Computer/DVI
should appear on the