Managing The Projector From A Remote Computer - Epson PowerLite 7800p User Manual

note
A plug-in will be available
to allow you to manage your
projectors in HP OpenView.
Check with your dealer or
EPSON for availability (see
page 113).
If you're using a network
management utility running
SNMP, you can configure
your network to send trap
alerts even without a plug-in
(see page 78). This feature is
intended for use by network
administrators only.
Managing the Projector from
a Remote Computer
Y
our projector's Easy Management software lets you monitor and
control your projector(s) from a remote computer in several ways:
Use EMP Monitor to see your projectors' status, switch image
■
sources, and control basic settings.
Use EMP NetworkManager to receive e-mail notifications
■
alerting you to possible problems.
Use a network management utility running SNMP, such as
■
™
HP OpenView, to manage your facility's equipment from a
pre-existing system.
To use the Easy Management software to manage your projector(s),
first install it as described on page 76. Then connect and configure
each projector you want to monitor, so it can be recognized on your
network (see page 78).
This chapter covers the following information:
Installing the Easy Management software
■
Connecting the projector to and configuring it for the network
■
■ Using EMP Monitor
Using EMP NetworkManager
■

Managing the Projector from a Remote Computer

1
75