Starting The Projector With A Password - Epson PowerLite 7800p User Manual

caution
If you lose the remote
control, you will not be able
to enter the password. Keep
the remote control in a safe
place at all times.
Displaying and Adjusting the Image
42
2. Use the pointer button to set
press the button.
Enter
3. Select and press the
Password
4. When you see a message asking if you want to change the
password, select
Yes
5. Press the button on the remote control. When it lights, the
Num
numeric keypad is activated.
6. Use the numeric keypad to enter a four digit password. (The
default setting is 0000.)
7. When you see a confirmation message, reenter the password.
Then press the
Menu
8. Press the button on the remote control to deactivate the
Num
numeric keypad.

Starting the Projector with a Password

When Password Protect is enabled, you see this screen when you plug
in the projector:
Enter the password. Enter the password.
[0-9]:Enter [0-9]:Enter
1. Press the button on the remote control to activate the
Num
numeric keypad.
2. Enter the four digit password.
3. Press the button to deactivate the numeric keypad.
Num
The Security Lock Release screen closes, and projection begins.
Security Lock
button.
Enter
and press .
Enter
button to exit the screen.
Password Password
to . Then
ON