Connecting a Composite Video Source
1. Locate the RCA-style video cable provided with the projector.
2. Connect the cable to the yellow video output connector on your
player and the yellow
3. If you want to play sound through the projector, see page 24 for
instructions on connecting an audio cable.
4. If you don't need to make any other connections, see Chapter 2
or the Quick Setup sheet for instructions on turning on the
projector and adjusting the image. Once the projector is turned
on, select the image source: press the
control, or press the
panel repeatedly until
connector on the projector:
Video
Video
button on the projector's control
Video/BNC
is displayed on the projected image.
Video
button on the remote
Setting Up the Projector
11