Menu Setting Mode - TTI TCB-560 Instruction Manual

7. Menu Setting Mode

Pressing the Emergency/Backlighting button, turn on the transceiver. The
transceiver goes to the Menu Setting Mode, which has the following
menu features. This menu setting mode allows you to program user
preferences, activate features and use advanced functions.
Display Functions
Beep Tone
Time-out Timer
Scan Receive Timer
Scan Delay Timer
(after Receiving signal)
Backlight Dimmer
Noise Blanker
Noise Blanker : The NB circuit helps to eliminate most electrical impulse
interference caused by engine ignition system etc. This allows clearer
reception of weak signals even under noisy electrical conditions.
Note :
Use the AM/FM button to selecte the main menu features such as
1.
Beep Tone, Time-out Timer, Scan Receive Timer, Scan Delay Timer
and Backlight Dimmer.
Use the up/down buttons to select or change any value that you
2.
like to have while the values are blinking.
Press the PTT button of the Microphone to complete the selections
3.
and changes and return to the stand-by mode. Or the selections and
changes will be automatically confirmed after 5 seconds of the
selections and changes.
10
Settings
On( ) / Off(
Off( ) and 1~99 Sec.
Continue( ) and 1-99 Sec.
Off( ) and 1~99 Sec.
High( ) / Low(
On( ) / Off(
)
)
)
TCB-560