Setting The Clock; Checking The Clock - Jensen JBS-210 User Manual

After plugging in the AC power, "12:00" will start flashing on the LCD display for few seconds and
then stay lit.
1. In Power Off (Standby) mode, press and hold the TIME SET Button on remote control or main
unit, the 12 HOUR format "12H" will show in display.
or
2. Tap the
Otherwise, press the TIME SET Button to confirm 12 Hour clock format and enter clock setup
mode, Hour digits will be flashing.
or
3. Tap the
the button for fast advance / reverse setting.
Note: Make sure the hour is set so that the PM indicator is displayed correctly.
4. Press the TIME SET Button on remote control to confirm the hour setting, the minute digits will
flash to prompt for input.
or
5. Tap the
the button for fast advance / reverse setting.
6. Press the TIME SET Button on remote control again to complete the setting.
NOTE: If the backup batteries in the unit are exhausted or if no batteries are installed, the clock
and radio station presets will need to be reset if the power is interrupted or in the event of a
power outage. Please follow steps 1-6 above to reset the clock.
The unit will show the current time in standby mode. To check the current time after the
button is pressed (Power ON mode), press and hold the TIME SET Button on main unit or remote
control for 3 seconds, the current time will show for 3 seconds and then return to the previous
screen.
ALARM OPERATION (REMOTE CONTROL ONLY)
SETTING THE ALARM CLOCK
This function allows the system to turn on automatically and wake you using a beeping alarm, CD
or the RADIO.
1. In standby mode, press and hold the ALARM Button on remote control for 3 seconds, the
alarm icon
flashing.
or
2. Press the
confirm, Minute digits will be flashing.
Note: Make sure the hour is set so that the PM indicator is displayed correctly.
or
3. Press the
confirm, alarm wake up source will appear in display.
or
4. Press the
display) and then press the ALARM Button again to confirm, alarm volume level will be flashing.
or
5. Press the
ALARM Button to finish alarm setup. Alarm icon
NOTE:
1.)
If "Wake to CD" is selected, but a CD is not inserted, the alarm will default to the Beeping Alarm
automatically when the alarm wake time is reached.
2.)
For 'Wake to Radio (AM or FM)", the system will default to the last AM or FM radio station
listened to before switching off.
3.)
The crescendo alarm will increase to the volume level you have set.

SETTING THE CLOCK

Button on remote control or main unit to select 24 Hour format if necessary.
Button on remote control or main unit to adjust the hour. Press and hold
Button on remote control or main unit to adjust the minute. Press and hold

CHECKING THE CLOCK

and alarm time 12:00 will appear in display. Hour digits of alarm clock start
Button to set the hour and then press the ALARM Button again to
Button to set the minute and then press the ALARM Button again to
Button to select wake to radio AM, FM, CD or Alarm (BE shows on the
Button to preset the wake up alarm volume level and then press the
shows on display stedily.
E-10
Power