Table of Contents
Advertisement
Standby Mode is when the unit is first plugged into an AC power source (display flashing), or
after all the settings have been made and the time is showing on the display. The radio, CD
player, Bluetooth and Aux-in modes are all off, no buttons are pressed and no alarms are
sounding.
The LCD DISPLAY (#15) will flash when the unit is plugged in for the first time. The unit is now
in standby mode.
Turning the unit ON:
•
In Off (standby) mode, tap the
or on the remote control to turn the unit ON. The last selected source icon will show on LCD
display.
Turning the unit OFF:
•
To turn the unit OFF (standby), press and hold the
on top of the main unit until the power goes off or press the
remote. The LCD DISPLAY show the current time.
The LCD DISPLAY (#15) will flash when the unit is plugged in for the first time. The unit is now
in standby mode.
Setting the Time:
1.
In standby mode, press and hold the CLOCK SET BUTTON (#3)
until the hour digits of the clock display begin to flash.
2.
Repeatedly tap the
the hour. Press and hold the buttons for fast advance/reverse
setting. Make sure the correct AM or PM time is selected when
setting the hour.
Note: The PM INDICATOR is located in the upper left part of the display.
The PM INDICATOR will light when the hour digits selected are for PM time. The PM
INDICATOR will be off when the hour digits selected are for AM time.
3.
Press the CLOCK SET BUTTON (#3) to confirm the time and the
minute digits will flash.
4.
Repeatedly tap the
the minute. Press and hold the buttons for fast reverse/advance
setting.
5.
Tap the CLOCK SET BUTTON (#3) to confirm and complete the setting. The display will
stop flashing.
STANDBY MODE
TURNING THE UNIT POWER ON/OFF
POWER/ SOURCE BUTTON (#1) on top of the main unit
SETTING THE CLOCK
BUTTON (#5) or
BUTTON (#5) or
POWER/ SOURCE BUTTON (#1)
BUTTON (#8) to set
BUTTON (#8) to set
E-8
POWER BUTTON on the
Advertisement
Table of Contents
