Keypad
The keypad fastens to the inside of the top case. The keypad consists of the keypad ECA, the rubber key
set. Both parts are available separately.
1
Remove the following items:
Rear bezel (page 42)
Outer handle (page 37)
Top case (page 47)
2
Place the top case face down on a soft work surface.
3
Remove the eight M3x6 Plastite Torx screws that fasten the keypad to the top case. Then lift the
keypad ECA out of the recess in the top case.
4
Gently lift the rubberized key set out of the top case.
SP7205 Service Manual
33