Starting Up The Projector - Epson PowerLite 52c Product Information Manual

Epson powerlite 52c: product information
Hide thumbs Also See for PowerLite 52c:
Table of Contents

Advertisement

Use the figure below as a guideline to help you determine how
far from the screen to place the projector. Image size generally
increases with distance, but may vary depending on how you
position the lens ring and whether you have adjusted the
image size with other settings.
33.2 to 37 ft
6.5 to 7.5 ft
If you place the projector below the level of the screen, you'll
have to tilt it up by extending the feet. Tilting the projector
upward causes the image to lose its rectangular shape, but you
can correct the distortion by pressing the
described on page 5.
If you place the projector level with the bottom of the screen,
the image will be rectangular and you won't have to adjust it.
If you place the projector higher than the bottom of the
screen, the image will still be rectangular, but you won't be
able to fill the whole screen with the image.

Starting Up the Projector

Make sure your projector and other equipment are set up and
connected correctly. Then turn on your projector, as described
below, followed by any equipment you've connected to it. You
can turn on your computer and video equipment in any order,
but if you have both a computer and video source connected,
you may have to press the
projector to switch to your video source (see page 4).
2.9 to 3.7 ft
Distance
from screen
button as
Keystone
button on top of the
Source
Turning On the Projector
Follow these steps to plug in and turn on the projector:
1. Connect one end of the power cord to the projector's power
inlet.
2. Connect the other end to a grounded electrical outlet.
The power light on top of the projector turns orange,
indicating that the projector is receiving power but not yet
turned on.
Power light
3. Remove the lens cap.
Ideal
height
Caution: Do not use the projector with the lens cap
in place. The heat generated by the lens can
damage the cap.
4. Press the red
remote control.
The power light flashes green as the projector warms up, and
the projection lamp comes on in about 30 seconds. Then the
power light stays green.
11/02
EPSON PowerLite 52c Projector
button on top of the projector or on the
Power
Power
Computer
S-Video/Video
Color Mode
Menu
A/V Mute
Freeze
E-Zoom
EPSON PowerLite 52c Projector
3
-

Advertisement

Table of Contents
loading

Table of Contents