Pit Boss 820FB Owner's Manual page 10

Section One:
Part Needed:
Hardware Required:
Screw 1/4"- 20* 3/5" x 4 (AA)
4
Installation Steps
 Using your wrench secure all four screws (A)
through the handle (13) and insulated felt
spacers, onto the barrel.
 Ensure a tight fit, without over tightening.
IMPORTANT:
DO NOT use the Chrome Side Shelf Handle to move or lift the unit.
Because of the size, it will break. This is not a warranty item.
ATTACHING THE GREASE BUCKET
COOKING GRIDS (2)
UPPER COOKING RACK (1)
ASSEMBLY INSTRUCTIONS
ATTACHING THE SIDE SHELF HANDLE
#13 Tray Holder— 820Deluxe
Stainless
2 Insulated Felt Spacers
PLACING THE COOKING COMPONENTS
Your Pit Boss grill comes with Cast Iron cooking grids. Cast Iron is an excellent
heat absorber and is still the best way to produce those "steak house' sear
markings.
NOTE: To maintain the searing and grilling performance of your cooking
grids, as well as their longevity, some special care and maintenance Is
ATTACHING THE SERVING TRAY
required as with any cast iron cooking tools.
Place this Porcelain Coated steel grid on to the two brackets
found on either end of the barrel
Page 10