Using A Browser To Control The Projector - Epson PowerLite 450W User Manual

Using the Projector on a Network
94

Using a Browser to Control the Projector

You can use a standard web browser to monitor and control the
projector through the network. Because you can use your computer's
keyboard, you may find it easier to make network settings using your
browser than using the projector's remote control.
1. Make sure the projector is set up for your network, as described
on page 76. (Standby Mode in the Extended menu should be set
to
Communication On
mode.) When using a browser to access the projector, you cannot
connect through a proxy server.
2. Open your web browser and enter the IP address of the projector
you want to monitor in the browser window.
If you're not sure what the address of the projector is, turn the
projector on and select
Info.-Wireless LAN
address of the projector. Do not enter leading zeroes.
3. Press , or, if you set a Web control password in the
Enter
projector's Network menu, enter your user name and password,
then press . You see a screen like the following:
Enter
to monitor the projector in standby
Net. Info.-Wired LAN
from the Network menu to display the IP
or
Net.