Selecting An Image Source; Adjusting The Image - Epson PowerLite 450W User Manual

Displaying and Adjusting the Image
28
If you want to turn the projector on again, make sure the orange
Ppower light is not flashing, then press the Ppower button.

Selecting an Image Source

You may need to select the image source if you have multiple image
sources connected to the projector (such as a computer or DVD
player). Selecting the image source lets you switch between images
input from different pieces of connected equipment.
If you don't see the image you want, press the
on the remote control or the projector until you see the image you
want to project. Or, press one of the Source buttons on the remote
control ( ,
Computer Video
If you still can't see an image or can't project the same image that is on
your notebook or computer screen, see page 114 for solutions.
Select to project from a USB device or
USB
network. See page 40 for instructions.

Adjusting the Image

Once you see your image, you may need to make certain adjustments:
To focus the image, see page 29.
■
■ To quickly adjust the color, brightness, or contrast, see page 30.
To change the image aspect ratio, see page 31.
■
If you need to fine-tune the image and/or sound, see
■
"Fine-Tuning the Projector" on page 59.
Source Search
, , or ).
USB LAN
Source Search button
Source
buttons
LAN
button
to project over a