Disabling The Projector's Buttons - Epson PowerLite 450W User Manual

Choosing When to Display the Image
After your image is saved, you can set it to display as the startup
screen, the screen you see when there's no signal, or the screen you see
when you press the
A/V Mute
1. Press the button, highlight the
Menu
.
Enter
2. Select and press
Display
3. Choose from these display options:
Set
■ Display Background
when there is no signal.
Set
■ Startup Screen
projector is warming up.
Set
■
A/V Mute
the
A/V Mute
4. When you're finished, press

Disabling the Projector's Buttons

When you enable the Control Panel Lock function, you can lock all of
the projector's buttons, or all of the buttons except the Ppower
button. The remote control can still be used to operate the projector.
1. Press the button, highlight the
Menu
.
Enter
2. Select
Control Panel Lock
3. Select (to lock all projector buttons) or
Full Lock
lock all buttons except the Ppower button) and press
4. Select and press
Yes
button (see page 34).
Extended
.
Enter
to to display your image
Logo
to to display your image when the
On
to to display your image when you press
Logo
button.
to exit.
Menu
Settings
and press the
to confirm the setting.
Enter
menu, and press
menu, and press
button.
Enter
(to
Partial Lock
.
Enter
Fine-Tuning the Projector
note
You can lock these settings to
prevent them from being
changed without a password
(see page 69).
73