Epson PowerLite 450W User Manual page 68

note
Do not use the projector at
altitudes above 7,500 feet
(2,286 meters).
Fine-Tuning the Projector
68
■
Operation
Direct Power On:
projector when you connect the power cord (without pressing the
Ppower button).
: Enable if you want the projector to turn off
Sleep Mode
automatically if it is idle and no signal is received for 1 to 30
minutes (you can adjust the amount of time using the next
setting).
Sleep Mode Timer
period of time before the projector turns off automatically, from
1 to 30 minutes.
High Altitude Mode
above 4,900 feet (1,500 meters) to ensure that the temperature is
regulated properly. Turn this setting off for lower elevations.
■
Standby Mode
Select
Communication On
monitored and controlled from a computer when it is in standby
mode (the power light is orange). This setting also allows you to
use a microphone connected to the projector when the projector
is in standby mode.
■
USB Type B
Select how you want to use the
Select
USB Display
images. Select
Wireless Mouse
buttons like a wireless mouse. See page 38 for restrictions and
details.
■
Language
Select a language to use for the projector menus and messages.
Enable if you want to be able to start the
: When Sleep Mode is on, you can set the
: Enable when you are using the projector
to enable the projector to be
TypeB
to use the USB port to project computer
to use the remote control
(square) USB port.