Connecting A Component Video Source - Epson PowerLite 450W User Manual

Connecting a Component Video Source

If your video equipment has component video connectors (three
connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you will need a
component-to-VGA video cable or a component video cable and
adapter. You can order the component-to-VGA cable (ELPKC19)
from Epson (see page 19) or an electronics dealer.
1. Connect the component end of the cable (3 male RCA) to the
color-coded Y/Cb/Cr (or Y/Pb/Pr) connectors on your player.
2. Connect the other end of the cable (HD15 male) to the blue
or
Computer1 Computer2
3. You may need to change the
projector's Signal menu to
4. If you want to play sound through the projector, see page 53 for
instructions on connecting an audio cable.
5. When you've finished making connections, see page 25 for
instructions on turning on the projector and page 28 for
instructions on displaying and adjusting the image.
Once the projector is turned on, select the image source by
pressing the
Source Search
control.
port on the projector.
Connect component-
to-VGA cable
Connect component-
to-VGA cable
setting in the
Input Signal
(see page 64).
Auto
button on the projector or remote
Connecting to Computers, USB Devices, and Other Equipment
Component-to-
VGA cable
(ELPKC19)
51