Controlling The Audio Device (Bluetooth Connection) - Sony WF-C500 Help Manual

Help Guide
Wireless Stereo Headset
WF-C500

Controlling the audio device (Bluetooth connection)

If your Bluetooth device supports the device operating function (compatible protocol: AVRCP), then the following
operations are available. The available functions may vary depending on the Bluetooth device, so refer to the operating
instructions supplied with the device.
You can use the button on the right unit to perform the following operations.
Play/Pause: Press the button once briefly.
Skip to the beginning of the next track: Press the button twice quickly.
Skip to the beginning of the previous track (or the current track during playback): Press the button 3 times quickly.
You can use the button on the left unit to perform the following operations.
Increase the volume: Press the button on the left unit once during music playback to increase the volume by 1 step.
Decrease the volume: Press and hold the button on the left unit during music playback to decrease the volume
continuously. Release the button at the desired volume level.
When the volume reaches the maximum or minimum, an alarm sounds.
Note
If the communication condition is poor, the Bluetooth device may react incorrectly to the operation on the headset.
The available operations may vary depending on the connected device, the music software, or app used. In some cases, it may
operate differently or may not work even when the operations described above are performed.
When you use an iPhone, Siri may be activated by pressing and holding the button on the right unit.
5-030-793-11(1) Copyright 2021 Sony Corporation
68