Special Warnings And Fault Reporting - Baumatic BMEH94I1G Instructions For Use And Installation

Hob with induction hotplates and gas burners
Table of Contents

Advertisement

Available languages

Available languages

SPECIAL WARNINGS AND FAULT REPORTING

▪ During the warranty period, only a service center authorized by the manufacturer may carry out any repairs.
▪ Before making any repairs, make sure the appliance is disconnected from the power mains either by removing the fuse
or by disconnecting the power plug from the wall outlet.
▪ Unauthorized tampering with and repairs of the kitchen range (cooking hob) can result in electric shock or short circuit;
hence, do not attempt to perform any repairs by yourselves. Leave such tasks to an expert or an authorized service unit.
▪ In case of minor faults or problems with the appliance operation, check the following instructions to see whether you can
eliminate the causes by yourselves.
▪ Elimination of any errors or warranty claims that resulted from improper connection or use of the appliance is not
covered by our warranty. In such cases, the costs of repair are borne by the user.
Following is some advice on rectifying some common problems.
Problem
The flame is uneven / unstable
The flame from the burners
suddenly changes
Burner ignition takes more time
The flame is extinguished
shortly after ignition
The grid has discolored in the
burner area
Electric power supply in
general is interrupted
Electric ignition of the burners
no longer works
If the burner cover looks
unappealing
If the problem persists despite observing the instructions above, call an authorized service technician.
Possible cause
Wrong gas power setting.
Wrongly assembled parts of the
kitchen hob
Wrongly assembled parts of the
kitchen hob
Knob pressed too short or to
weakly.
This is a commonplace
phenomenon resulting from high
temperature
The fuse may be blown
There are food or detergent
residues between the spark
plug and the burner
Regular dirt
Elimination
Have an expert check he gas pipeline!
Assemble the burner correctly.
Assemble the burner correctly.
Keep the knob depressed for a longer period
of time. Before releasing it, pres it harder.
Clean the grid with a metal care detergent.
Check the fuse in the fuse box and replace it if
it is blown
Open and carefully clean the opening between
the spark plug and the burner
Clean the burner covers with a metal care
detergent.
19

Advertisement

Table of Contents
loading

Table of Contents