OPERATING THE INDUCTION COOKING ZONES
Hob control elements
for induction cooking zones
Slide control power
Activating the hob
Turning hotplates on
• After turning the ceramic glass hob on all displays come on for a moment. The hob is
ready for operation.
• The hob is fitted with electronic sensors which are switched on if you touch the relevant
circle for at least one second.
• Each sensor activation is followed by a sound signal.
• Avoid placing any objects on sensor surface (possible error signalization_Er03).
Always keep the sensor surface clean.
A. ON/OFF sensor
A
ON/OFF indicator LED
1.
B. Slide control sensor
B
. Slide control indicator LED's
1
C. Extra strong power setting ON/OFF sensor
D. Safety lock on/off and child lock sensor
D
. Safety lock /child lock indicator LED
1
E. Hotplate selection/power or remaining heat displays
E
Decimal dot on the power displays:
1.
On: hotplate power control is possible
Off: hotplate power control is not possible
F. Timer ON/OFF sensor
F
. LED indication cooking zone on which the timer is active:
1
Flashing: time setting is possible
Fixed: time setting is not possible
Touch the sensor (A) for at least one second. The hob is now active, and all hotplate
power indicators (E) indicate »0«, (E1) is flashing and the timer display shows "CL" .
Now you need to select the next setting within 20 seconds, otherwise the hob
switches off again.
After turning the hob on using the sensor (A), within the next 20 seconds start one of the
hotplates.
• Touching the desired hotplate sensor (E), its relevant power indicator indicates »0« and
(E1) changes from flashing fixed.
• Set the power level 1-9 by touching the slider. At the first touch, the level is set
according to the part of the slider that you touch. Upon the slider, the control LEDs light
up, according to the level set. By sliding along the slider, the power level setting is
changed. By sliding to the right, the level increasing, while sliding to the left decreases
the level. When you move your finger away from the slider, the cooking field starts to
operate at the level set. If the first touch of the slider is on its far right side (level 9),
followed by a new pressure level 9, the automatic cooking is activated (see Automatic
fast heating).
0
Medium power
Full power
12