Choose A Location - Epson MovieMate 30s Quick Setup Manual

2
Choose a location
You can use your MovieMate just about anywhere—in the living room, bedroom,
or even outside. You can use it with an optional subwoofer and screen, or simply
project on a wall and use the built-in audio system.
The following pictures show four different setups.

If you want an 80-inch diagonal size image, place MovieMate about
6 feet away from the wall or screen. The following diagram shows the
1 ⁄
2
approximate image size (measured diagonally) at various distances.

If you want to project against a wall, choose a flat white wall with a smooth
surface for best results.

MovieMate doesn't have to be directly in front of the screen or wall, but it
has to face straight ahead (at a 90-degree angle to the projection surface).

If the image is too low, too high, or off to the side, you can use the quick
image adjustment dials to adjust the position. See section 5 on the back
of this sheet.

Make sure you have a grounded electrical outlet, power strip, or extension
cord to plug MovieMate into.