Adjust The Image - Epson MovieMate 30s Quick Setup Manual

5
Adjust the image
1
If the image is too low, too high, or off to the side, use the quick
image adjustment dials to adjust its position.
If the picture looks like this
straight ahead. Make sure you position MovieMate at a 90-degree
angle to the screen or wall. You can then use the left/right quick
image adjustment dial to center the image.
2
Use the zoom ring to adjust the size of the image.
3
Use the focus ring to sharpen the image.
4
To enlarge or reduce the aspect of the ratio of the image,
press the
6
End a DVD movie
1
Press
2
Press
3
Press the
Up/down dial
button on the remote control.
to stop playing the DVD.
to open the tray and remove the DVD. Close the tray.
Power button to turn off the lamp.
or this
Zoom ring
Focus ring
Left/right dial