Epson Home Cinema LS11000, V11HA48020 - 4K PRO-UHD Laser Projector Quick Setup Guide Manual

Choose a location

Before using this product, make sure you read these instructions and the safety instructions in the online User's Guide.

Keep the projector level and place it at a height so its lens is even with the top or bottom of the screen and is centered horizontally. If this isn't possible, use the lens shift feature to reposition the image (see "Adjust the image").

See the online User's Guide for more information on where to place your projector.

Connect the projector

Connect multiple video devices and use the Source buttons on the remote control or the Source button on the projector to switch between them. For additional connection types, see the online User's Guide.

Note:

• When projecting images at 4K 120Hz, use an HDMI 2.1 rated cable (ultra-high speed).
• You can output audio to an external sound system that supports (eARC/ARC) using the HDMI2 (eARC/ARC) port.

Turn on your equipment

1. Plug in the projector.
   
2. Press the power button on the projector or the On button on the remote control. The shutter opens and the power light flashes blue, then stays on.
   
   Note: To shut down the projector, press the power button on the projector or the Standby button on the remote control, then press the button again to confirm, if necessary. Wait for cooldown to complete before unplugging the projector.
3. Follow the on-screen instructions to set up your projector. If you see a screen displaying 123, press Enter on the remote control to continue. Use the arrow buttons to select the correct image orientation and press Enter.
   Note: To change these settings, see the online User's Guide.
4. Turn on your video source.
5. If you don't see an image, press one of the Source buttons on the remote control to select the image source.

Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on this sheet.

Using the remote control

Install the batteries as shown (two AA batteries).

For more information on using the remote control, see the online User's Guide.

Adjust the image

1. Press the Pattern button on the remote control to display a test pattern.
   
2. Press the Lens button on the remote control and use the and buttons to focus the image.
   
3. Press the Lens button on the remote control again and use the and buttons to reduce or enlarge the image.
   
4. Press the Lens button on the remote control again and use the ,, , and buttons to reposition the image.
   

Troubleshooting

If you see a blank screen or the No signal message after turning on your video device or computer, check the following:

• Make sure the power light on the projector is blue and not flashing.
• Press the Source button on the projector or one of the Source buttons on the remote control to switch to the correct image source, if necessary.
• If you're using a Windows^® laptop, press the function key that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear.
  On Windows 7 or later, hold down the Windows key and press P at the same time, then click Duplicate.
• If you're using a Mac laptop, open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox.

Registration

Register today to get product updates and exclusive offers. You can register online at http://epson.com/webreg.

Where to get help

Manual

For more information about using the projector, see the online manual. You can view or download the online manual from the Epson website, as described below.

Internet support

Visit http://epson.com/support/hcls11000 (U.S.) or http://epson.ca/support/hcls11000 (Canada) for solutions to common problems. You can download software and utilities, view manuals, get FAQs and troubleshooting advice, or contact Epson.

Telephone support

To use the Epson PrivateLine^® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).

Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am to 4 _pm, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Optional accessories

For a list of optional accessories, see the online User's Guide.

You can purchase accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at http://epsonstore.com (U.S. sales) or http://epsonstore.ca (Canadian sales).