Reading The Indicators - Epson EMP-830 Quick Reference Manual

Reading the Indicators

The projector is provided with indicators to notify
you of the projector operating status.
The following tables show what the indicators
mean and how to remedy the problems that
they indicate.
When the Power indicator is lit/flashing red
Red Red
Red
Red Red
Internal error Fan related error/
Sensor error
Red
Red
Lamp open error
Lamp timer failure
Lamp out
Lamp cover is open
Problem/Warning
Disconnect the power cable from the electrical outlet.
Then contact your dealer or the nearest address provided in the "International Warranty
Conditions" section of the Safety Instructions/World-Wide Warranty Terms booklet.
Check if the lamp is broken.
Disconnect the power plug from the electrical outlet and wait for the lamp to cool down
sufficiently (takes about one hour) before checking.
If the lamp is
not broken
Replace the
lamp and
then turn the
power on.
If the lamp is
Contact your local dealer for further advice.
broken
Indicates the
operating status of
the projector
Indicates the
lamp status
Indicates the internal
temperature status
If the problem is still not solved after the lamp is
If the lamp
replaced, stop using the projector and disconnect
still does not
the power cable from the electrical outlet. Then
turn on,
contact your dealer or the nearest address
replace it with
provided in the "International Warranty Conditions"
a new lamp.
section of the Safety Instructions/World-Wide
Warranty Terms booklet.
User's Guide "Reading the Indicators"
If all indicators are switched off,
check that the power cable is
connected correctly and that
power is being supplied normally.
lit flashing off
14